Wednesday 28 December 2016

EUROFusion

May 2016 
Back in May of this year I was found on Twitter by Anne Purschwitz, a journalist for EUROFusion. She was looking for young people that were interested in fusion and science communication and since I was passionate about both, she thought I was the perfect person! She needed young scientists for a new project EUROFusion was carrying out, which involved making an issue of the Fusion in Europe magazine entirely written by young scientists. This was a hard challenge since she had to find young scientists that were willing to give up their time to do this, that were interested in fusion and you had a bit of experience in science writing - it was tough but she managed to find 14 students from all across Europe!


Summer 2016
That summer I became a Young Face of Fusion for EUROFusion and was featured on the EUROFusion website - check out the article here. I was so honoured to become a young face of fusion for EUROFusion and even more honoured to be able to share my story and my passion for physics.




September 2016

When I came back from my placement at SLAC, check out blog posts here, here, here and here, I was contacted by Anne about an incredible opportunity relating to my new role as young fusion writer for EUROFusion. The opportunity she told me about was so incredible that I just couldn't believe that this was happening to be --- Anne gave me a unique chance/task to interview the new CEO of the UK Atomic Energy Authority, Prof. Ian Chapman!!!! But the exciting news didn't stop there .. Anne was allowing me to interview Prof. Chapman at the JET HQ!!!!!!! So I was going to visit the Culham Centre for Fusion Energy, meet Prof. Chapman and have a personal tour around JET!!!!!!!! I just couldn't believe it! This was such excellent news and I was absolutely thrilled to visit JET, the largest tokamak in the world!!!! (I almost fainted!)



Check out my tour around JET in the following video - hope you enjoy it! :)



I was given a hard hat before I went inside the huuuuuuugggeee room that JET lived in. I honestly couldn't keep my jaw from dropping each time I looked up to see this huge machine surrounded by wires, lots of metal, coils, and pipes. It was awesome!



After my tour around JET, it was time for me to meet Prof. Chapman! I was so excited to meet him because at the young age of 34 he is one of the youngest CEO's of a major research centre and I was inspired by his story not only because of this but also because he did his PhD in the same group that I am doing my MSci in at Imperial!


This was my first time interviewing someone (I'm more used to being interviewed) so it was nice to have the tables turned. I set up my camera and had my questions ready. All in all the interview took about 15 minutes and it was great to hear Chapman's answers.

Professor Ian Chapman and I



After this, I was on my way home to write up my article for the next issue of Fusion in Europe. Once this was done I sent it off to Anne where it underwent a quick editing process and was all glammed up in final PDF form for the magazine. I couldn't wait to see the magazine with my article in! 


October 2016
By October the finished article was published and the Fusion in Europe magazine (with my face on the front cover!) was shipped around the globe for fusion scientists, enthusiasts and others to read!

Can't believe I'm on the front cover!

Lots of copies of the Fusion in Europe magazine being shipped around the world!


This was super exciting! It was great to read the articles of the other students involved and the magazine had a great young and fun vibe about it. You can check out my article and the video interview with Prof. Chapman here.




---------------------------



You too can visit the Culham Centre for Fusion Energy and even study/work there - check out this link for more info!




I'd like to finish this blog with a few words from me:
No matter what life throws at you always, always follow your heart and work hard for your dreams, because maybe, just maybe your dreams will come true and all those long hours of hard work will pay off! Believe in yourself and anything is possible! I believe in you!

Sunday 4 December 2016

My last few weeks at SLAC

. . . The last few weeks at SLAC . . .

I've been meaning to write this blog post for a while and have only just got the chance to write it. It's been a hectic few months as I've transitioned into my last year of my MSci Physics degree at Imperial College. And I can't believe I have gotten this far! But anyway, more info about my AMAZING MSci project will be up in my next blog post .. so watch this space! :)

But for now let's go back to a few months ago, when I was completing my internship at SLAC!

The final few weeks at SLAC were jam-packed with lots of science! And I certainly didn't want to leave! I was having the BEST TIME EVER!!

Just as a quick reminder, my project at SLAC focussed heavily on the construction of a laser system that will form part of the development stage of the new upgrade to the Linac Coherent Light Source (LCLS) known as LCLS II. Not only did I get the chance to work on this SPECTACULAR laser system but I also got to name it!! Because this laser system is extremely powerful and can start a fire I named it IGNIS which is the Latin word for fire.

IGNIS
For the laser scientists + general science fans out there here's the spec for IGNIS:

Average power: 100 W
Wavelengths: 800 nm (+ 1500 nm)
Pulse duration: 15 fs
Pulse energy: ~1 mJ
100 kHz
OPCPA laser system

What's special about IGNIS?
IGNIS is a rare type of laser system because it's a HIGH REPETITION RATE, HIGH PULSE ENERGY and HIGH AVERAGE POWER laser system. All these qualities are rarely seen in a single laser system so I was very fortunate to work on it.

Whilst I was there, I was building the laser enclosure for IGNIS and helping to move equipment from the old lab into the new lab. I also did a bit of plumbing too which was definitely a new skill I learnt! 

The completed enclosure for IGNIS

Shiny new laser enclosure for IGNIS

Huge spanner for some plumbing for the cooling system for IGNIS


The Herriott Cell
The most exciting part though, was when I got to work with a Herriott cell. A Herriott cell consists of two spherical, concave mirrors where one of the mirrors has an off-axis hole - the mirrors I was using were made of gold! So they were super expensive! Laser light enters through the hole and bounces between the two mirrors multiple times and then exits via the same hole under what is known as the RE-ENTRANT CONDITION. This condition states that the number of passes the light makes in the system multiplied by the angle between successive reflections is equal to a whole number multiple of 2π (360 °). For you maths fans out there we can describe this in the form of an equation:

Nθ = 2Mπ,

where N is a whole number (integer) and is related to the number of passes the light makes in the system,  θ is the angle between successive reflections and M is a whole number.


What's the point of a Herriott cell?
A Herriot cell allows light to bounce back and forth between the mirrors many times which means that when the light enters it will be a while til it comes out again, or at least a while in light timescales! So when a Herriott cell is added to a laser system it introduces what we call an optical time delay. Say, we have a pulse of light that enters the Herriott cell and a pulse of light that doesn't go through the cell we will see that the pulse of light from the Herriott cell arrives later than the pulse that didn't go through the cell. This is helpful in laser systems when you want two pulses of light from different paths to arrive at the same time. We can adjust the distance between the mirrors of the Herriott cell, the angle of the incident laser beam (and the diameter of the mirror) in order to adjust the optical time delay and make sure the pulses arrive together at the same time. This is exactly the reason why I was testing out the Herriott cell, I wanted to know if it could offer the optical time delay required in the IGNIS laser system ... and I found that it could! So the Herriott cell will be making up part of IGNIS! :)
The gold mirrors for the Herriott cell



The laser bounces multiple times between the mirrors along an ellipse on the mirror



Poster session
In the last week of my time at SLAC I was able to showcase my work at an intern poster session, where the Director of LCLS, Mike Dunne, would judge our posters and offer prizes for the best one. It was great to meet the other interns and see what cool stuff they were working on. I also got to meet Mike Dunne, who was the first person I spoke to at Imperial College about doing an internship at SLAC and so it was great to met him in America where he could see all the cool things I was up to.

Poster session fun! :)

My poster and video at the intern poster session


Photoshoot
Those of you that know me, know that I cannot complete an internship without having a lab photoshoot at the end of it! So here are some pics from all over SLAC! (Yes, I did take a tour around the whole of SLAC (which is HUGE) just for the photoshoot ... what can I say, I love a good photoshoot *smirks*)

Outside the LCLS Office building

I got to see the LINAC at SLAC - it was sooo cool! The tunnel looked like it went on forever!

A bit of weekend working in the Cali sun (Visitor's Building at SLAC)
LINAC


LINAC

I got to visit some of the experimental hutches at LCLS - they were awesome!
Just outside the Far Experimental Hall of LCLS 
American trucks are HUGE!


Outside the Far Experimental Hall, LCLS
  
I LOVE all the colour matching at LCLS!

The X-ray Correlation Spectroscopy hutch at LCLS
Coherent X-ray Imaging hutch at LCLS


Coherent X-ray Imaging hutch at LCLS - the pipe that runs through the room is the x-ray beam
Matter in Extreme Conditions hutch at LCLS


Matter in Extreme Conditions hutch at LCLS
 
Matter in Extreme Conditions hutch at LCLS


Electric truck at SLAC - cute!

 
The Californian sky is so beautiful!

XRT, LCLS


First international intern at SLAC!
As if it wasn't a blessing enough to be able to work at LCLS at SLAC, it was even more of a blessing to find out that I was the first ever international intern at SLAC ever! I couldn't believe that I was the first one! And not only that, recently at university I've been hearing about how I've paved the way for other undergrads at my uni to go over to SLAC and they've come up to me for advice and I cannot wait to see them venture out to SLAC and have the time of their lives just like I did! I cannot describe how honoured I feel to have paved the way for other undergrads to follow in my footsteps and carry out an internship at SLAC! Hopefully many more can have the amazing experience I had when I was out there! :)

Because I was the first international intern at SLAC I was asked to be featured on the SLAC website and of course I said yes! I was interviewed by Michael Ross about my time at SLAC, how I got the internship and what my future plans were. The article was accompanied by a photoshoot (yay! :) ) by Chris Smith. Check out the article here.


Me and my Herriott cell





AFTER WORK IT'S TIME FOR A BIT OF FUN . . . 
Here are some cool things I got up to in my final weeks in California:

French toast! Mmmmm...

Looking out for whales and baby seals

Beautiful scenery in California - just breathtaking!

Ford GT40 at SLAC Car Show

SLAC Car Show

SLAC Car Show

SLAC Car Show

SLAC Car Show

Stanford Dish

Stanford Dish

The view from the top of the Stanford Dish trail - you can see San Francisco!

Stanford Dish Trail

Five-star Rosewood Sand Hill Hotel - it was lush!


Poolside BBQ

Poolside BBQ

Monster Truck at Sonoma County Fair - probably the most American thing I did out there!

I got to see cute animals at the Sonoma County Fair too!

Butterfly House at Sonoma County Fair

Got to participate in the Escape Room which was a cool game that we played where we had to escape out of a room in half an hour and we did it with 10 seconds to spare! Woop! Woop!


My last (full) day in California ended with a BEAUTIFUL sunset - just perfection

Got to unleash my adventurous side with a bit of go-karting on my last day.


. . . Final words . . .
Overall, the internship at SLAC was the BEST experience I have had to date! It was an incredible opportunity and I cannot honestly believe that I was able to do this and work at this AMAZING national facility that is home to the largest linear accelerator in the world! Just. UNBELIEVABLE.

I learnt SO much, met incredible people and had my first experience away from home and it was my first time in America too! So all in all, it was FANTABULOUS! Cannot even put into words how amazing this opportunity was and I want to say a huge thank you to all those that helped me get to SLAC and have this amazing opportunity. Thank you very much Mike Dunne, Alan Fry, Joe Robinson and Katalin Mecseki and Franz Tavella for making my internship at SLAC possible.
A huge thank you goes to all those that made my time at SLAC and California the best thing ever: Sid Patankar, Maegan Gonzales, Riccardo Veraldi, Ernesto Paiser, Omar Quijano, Matthew Windeler, Israt Alam.


If there is one thing I've learnt from this trip is that your dreams can never be too big, never give up and always fight for what makes your heart sing.

Believe in yourself and anything can happen! I believe in you!